E
N
G
LI
S
H
!
However, the hanger must not be located just below the
socket outlet, and it must be located and connected to the
mains socket outlet so that the plug is accessible at any
time and the cable from the plug is always directed
downwards to the floor.
Operation
Connect the product to the mains by means of a movable supply
cable with plug 230 V ~. Switch on the heated part of the hanger as
needed using a switch on the mains plug. After a short time delay, the
heated surface of the upper part of the hanger starts increasing its
temperature up to the stable operating condition.
On the bottom side of the base, the hanger is equipped with clips for
winding the unneeded length of cable that may be used when the
distance of hanger from the mains socket outlet is shorter, see figure.
Technical Specification
Height
1720 mm
Base diameter
420 mm
Weight
9,5 kg
Maximum load
3 kg
Nominal voltage 230 V ~
Degree of IP protection
IP 44
Electrical class
I
Input
60 W
Operating temperature
max 75°C at full load with textile
Length of cable
2,5 m
Zon
e 0
Zon
e 1
2
2
5
0
600
Zon
e 2
Zones in bathrooms
