manualshive.com logo in svg

BitFlow NEO-PCE-CLB, Hardware Reference Manual

Share
Download
BitFlow NEO-PCE-CLB Hardware Reference Manual Download Page 101

Camera Control Registers

Bitfield definitions

Version G.5

BitFlow, Inc.

NEO-8-3

Table 8-2 explains the abbreviations used in the bitfield definitions.

Table 8-2  Abbreviations

Access

Meaning

R/W

Bitfield can be read and written.

RO

Bitfield can only be read. Writing to this bit has no effect.

WO

Bitfield can only be written. Reading from this bit will return 
meaningless values.

Karbon-CL

This bitfield is functional on the Karbon-CL.

Karbon-CXP

This bitfield is functional on the Karbon-CXP.

Neon

This bitfield is functional on the Neon

R64

This bitfield is functional on the R64 family.

Alta

This bitfield is functional on the Alta family.

Summary of Contents for NEO-PCE-CLB













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands