TS_TABLE_ENTRY
The Cyton-CXP
CYT-4-10
BitFlow, Inc.
Version A.0
TS_CONDITION
R/W, TS_TABLE_ENTRY[29..27], Cyton-CXP
This register is used to control the conditions under which this pulse will be output.
The following table shows the options for this bitfield.
TS_TERMINATE
R/W, TS_TABLE_ENTRY[30], Cyton-CXP
When this bit is set to 0, the table will stop running after the current pulse is output.
The TS_RUN_LEVEL bitfield will then read back idle.
When this bit is set to 1, the table will jump to the index set in the TS_NEXT bitfield
after the current pulse is finished.
TS_END_OF_
SEQUENCE
R/W, TS_TABLE_ENTRY[31], Cyton-CXP
If this bit is set to 1 and TS_RUN_LEVEL is set to Jump, the TS will jump to the index set
in the TS_INDX_JUMP bitfield after the current pulse is output. This bit allows for syn-
chronous switching between one section of the table and another section.
If thte TS_RUN_LEVEL bitfield is not set to Jump, then this bitfield will have no effect.
If this bit is set to 0, the TS will not jump from this index.
TS_CONDITION
Condition when pulse is output
0 (000b)
Immediate
1 (001b)
Rising edge of trigger
2 (010b)
Falling edge of trigger
3 (011b)
Trigger high
4 (100b)
Trigger low
5 (101b)
Both rising and falling edge of trigger
Summary of Contents for Cyton-CXP
