BitaTek Cyclops 1D, Settings Manual

Page: 6 / 75

BlueTooth Scanner Setting Guide
6
2. Action Mode
This device have three action mode for Bluetooth SPP communication, the default action
mode is real mode.
The mode can be changed by scan setting barcode. But, the customer can not change the
mode If the data file
（
data.txt
）
have some records not be send out .
The description of mode, please see the follow table.
Action Mode Description
Real Mode
The scan data will be transferred via Bluetooth connect, and
the scan data will not be transferred and not be saved to data
file when the Bluetooth is disconnect.
HID communication support.
This mode support connection error handshake.
It need an application to handle the communication
handshake and data receive / send on SPP communication
Batch Mode
The scan data will be saved to this device.
You have two methods to get the scan data
Bluetooth data transfer
：
You can send the data via
Bluetooth SPP connection.
USB transfer
：
You can transfer the data file via USB
cable connect.
You have two methods to delete the data.
Scan a factory default of setting barcode
Delete the data after USB connect
Hybrid Mode
The scan data will be transferred via Bluetooth connect, and
if Bluetooth disconnect, the scan data will be saved to the
data file, after Bluetooth reconnect, the records of data file
will be transfer to host device via SPP mode. After transfer
complete the records on the data file will be deleted.
You need an application to handle the handshake under SPP
communication.
The customer can make a decision, according the customer environment to choice the best
mode.