BITalino (r)evolution
User Manual
22 of 30
Click on the BITalino logo to access the available settings, see Figure 19. Select the channel
your sensor is connected to and select the
sensor type
from the dropdown menu highlighted
in the next screenshot.
Figure 19: Set the sensor type of the channel you have your sensor connected to.
Activate the channel for acquisition by clicking on the circle next to the channel type (must be
blue), see Figure 20. If not done before, follow the instruction available in section
to learn how to apply the sensors and
2.2 Connecting the BITalino devices with sensors
to learn how to connect your device to your BITalino device. Click on the record button in the
OpenSignals main interface whenever you’re ready for your acquisition.
Figure 20
: Start the acquisition whenever you’re ready.
