BITalino (r)evolution
User Manual
16 of 30
Figure 11: Setup for the BITalino Board kit and electrode cables (red) and battery connection (blue).
2.2.2. BITalino (r)evolution
Plugged
and
Core
The BITalino (r)evolution Plugged and Core can be connected to individual sensors such as
ECG, EMG, EEG, EDA, ACC and LUX using the analogue ports A1-A6 (see Figure 12). All
parts can be connected to the board using a sensor cable (see Figure 12 lower right). The
sensor BTN can be connected to the port I1/I2.
The actuators such as LED and BUZ can be connected to O1/O2 and the digital-to-analogue
converter (DAC) to pulse width modulation (PWM). Sensors for connection to an electrode
cable
marked
in
red.
Figure 12: BITalino (r)evolution Plugged and Core connection ports for sensors and actuators. Sensors for
connection to an electrode cable marked in red.
