When STATUS LED
repeats blinking in
red and blue
Check that the MODE switch is in the NORMAL position, and press the
RESET switch
4-2 Pairing with target systems (Device registration).
Turn ON the Bluetooth function in setting menu of Bluetooth on smartphone/PC, and pair
with
“
USB2BT:xxxxxxxx
”
. USB2BT does not have pairing button. Do not operate button of
USB2BT when pairing.
About a risk in the use of this product
Because this product is always waiting for pairing, there are risks of such USB2BT would be
connected from the other device, such as smartphone. So when you enter the password via
keyboard, check that USB2BT succeeded in recognize the target system and whether it is
possible to input operation correctly.
If STATUS LED lights in blue after lights in purple, it is success of the pairing. On
Windows-PC, it takes about 1 minute to turn blue, because it takes time to install the device
driver. After paring, please check that the target system can be operate with USB HID device.
If you cannot operate, please confirm the compatibility list again. When you replace the USB
HID device or reconnect after connecting this product to another target system, please delete
the pairing configuration on the smartphone/PC, then pairing again.
5-1 About storage case in using.
You can use the refreshing FRISK package as a case of this product. For more information on
processing, please refer to our web page : http://bit-trade-one.co.jp
