PASTA Board Razer Panthera PS3/PS4
Section 6: Troubleshooting
INSTALLATION MANUAL & USER GUIDE
REV B
PAGE 22
Section 6: Troubleshooting
This section is most useful by using a multi-meter. If you are
unsure where to get one or use one, here is a great YouTube
video to get you started:
https://www.youtube.com/watch?v=bF3OyQ3HwfU
No Power
Sometimes there might be an instance where power is being applied, but it will not turn on or
intermittently turns on. Try the following to see if this resolves your issue:
•
Ensure that power wires are not reversed.
•
Ensure that power wires are in the correct port.
•
Ensure that the screw terminals are tight.
•
Ensure that enough insulation was stripped off to expose proper amount of the
conductor.
No Button Signal or LED Signals
Sometimes there might be an instance where a button is being pushed but it will not turn on
or intermittently turns on. Same for LEDs if they don’t turn on correctly. Try the following to
see if this resolves your issue:
•
Ensure all cables are plugged into the correct location.
•
Ensure cables that do not use keyed connections are the correct orientation.
Latency
There is no latency as this is a breakout board. Any latency felt is due to your control board.
