background image

www.BISSELL.com      

6

Carpet cleaning

1. 

With your foot, push the red power pedal [located 

in foot of unit] ON .

2.

 With your foot, push the detent pedal on left side 

of lower body.

3.

 Press spray trigger to spray cleaning solution. 

Do 

not overwet.
4.

 To suction up water, repeat motion over same 

area without pressing the spray trigger.

5.

 Repeat steps 3 and 4 until no more dirt can be 

removed.

6.

 Continue to clean entire carpet, working in 1m x 

1m sections.

7.

 Empty the collection tank when dirty water 

reaches the full line, or when the clean water/

solution tank is empty. 

8.

 If floor nozzle stops spraying, push power pedal 

OFF and check water and cleaning solution levels. 

Refill if needed.

Empty the collection tank

1.

 Push power pedal OFF and unplug power cord 

from outlet.

2.

 Remove and empty collection tank.

a. 

Release collection tank latches [1 each  

side] by pulling up from bottom of latch  

and then out. 

b.

 Carefully remove collection tank from  

lower body by lifting handle. 

c.

 Carry collection tank to a toilet or sink.  

To empty, pour out contents using opening  

at back of tank.

d.

 Rinse collection tank thoroughly. 

e. 

Remove vent cover from top of collection tank 

by pulling the tab on top and pulling up.  Remove 

foam filter from vent cover. Rinse filter thoroughly 

and replace back into vent cover. Replace vent 

cover back into collection tank, making sure the 

tab clicks back into the locked position.

3. 

Remove lint and hair from red gasket in  

base of unit. 

(Do not remove gasket)

4. 

Clean nozzle window by lifting latch and 

removing from machine. Rinse under running water. 

When finished replace nozzle and secure with latch.

5.

 Replace collection tank on base of unit and 

secure with latches.

Operations

It is recommended that 

every time your clean water/

solution tank needs refilling, 

that you empty the contents 

of the collection tank. If the 

collection tank gets too full, 

you may begin to see foam 

spitting out of the vent 

cover. If this happens, empty 

the collection tank.

Tip

Power 

Pedal

Detent 

Pedal

2c.

2b.

2e.

2a.

3.

4.

Summary of Contents for WASH 2071 SERIES









Reviews: