Bissell spotclean 87K1 Series, User Manual

Page: 19 / 24

O
perations
getting ready
1.
To fill the solution/clean tank.
A. Remove the tank by lifting it straight up
and then away from the unit.
B. Unscrew the black cap at the bottom
of the solution/clean tank and remove
bottle insert.
C.
Add BISSELL Spot & Stain portable
machine formula to the FORMULA fill line
on the solution/clean tank. Fill the solution/
clean tank with hand hot (NOT boiling) tap
water to the WATER fill line. Replace the
bottle insert and tighten the black cap.
D. Replace the solution/clean tank by
lining up the vertical guides on the left side
of the unit with the indentations on the solu-
tion/clean tank and gently sliding it down
into position.
2. Release vacuum flex hose by twisting the
bracket latch clockwise. Unwrap vacuum
flex hose completely from around unit.
3. Attach the tough stain brush tool to the
vacuum flex hose by pressing tool onto the
end of the hose grip firmly until the button
lock snaps into hole. Make certain the tool
is securely attached.
4. Twist the Quick Release cord wrap clock-
wise to unwrap the power cord completely
from onboard cord storage and plug into a
proper outlet.
5. Press and hold spray trigger—spray will
start in a few seconds. Raise the tool slightly
to check for spray.
1A
1B
1C
1D
3 2
4
5
Water
Formula
w w w . b i s s e l l . c o m
6