8
global.BISSELL.com
WARNING
To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or
troubleshooting checks.
Cleaning the Sensors
After repeated use, debris can accumulate on the sensors
of the robot and performance could be affected.
Turn the Power Switch OFF and wipe the sensors with a
cloth to remove any debris.
Sensors and Contacts
1. Cliff Sensors
2. Charging Contact Points
3. Soft Surface Avoidance Sensor
1
3
2
2
1
1
Replacing the Edge Cleaning Brushes
Occasionally, the Edge Cleaning Brushes need to be cleaned to work more effectively. Once removed,
they can be rinsed or soaked in water. Be sure they are completely dry before returning to the
machine.
1.
Turn the Power Switch OFF.
Use a Phillips-head screwdriver
to remove the screw. Pull up
on the base of the brush.
2.
Push the brush directly
onto the holder. Replace the
screws with a Phillips-head
screwdriver.
