background image

www.BISSELL.com

14

 

 

Cleaning with Hose & Tool

Insert the hose and 

snap into place.  

Be sure the colored 

hose release clip 

is facing out, away 

from machine.

Press the spray trigger button to spray  

the soiled area, then slowly move tool back 

and forth over the area. 
Release the trigger to suck up the dirty 

solution. Work in small sections until the area 

is clean.
When finished cleaning, turn the machine on 

to suction up warm clean water to rinse the 

inside of the hose and tool. Detach the hose 

and tool and close the accessory hose door. 

Let the hose and tool air dry before storing.

Attach the tool to the end of the hose. 

(Tools may vary by model.) Press the 

power button to turn machine on.

NOTE: 

If using the 

Deep Reach Tool 

or

 Pet Stain Tool 

be sure the needles of the 

tool are pressed down into the carpet so the spray gets into the carpet fibers.

— 

Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts. 

Brushroll continues to rotate when in the upright 

position. 

— 

Brushroll continues to turn while product is 

turned on and handle is in upright position. To avoid 

damage to carpet, rugs, furniture and flooring, avoid 

tipping cleaner or setting it on furniture, fringed 

area rugs, or carpeted stairs during tool use. 

— 

The brushroll remains on while cleaning with the 

hose and tool. Do not allow cleaner to sit in one 

location for an extended period of time, as damage 

to floor can result. 

Lift the accessory 

hose door on top 

of foot on the front 

of the machine. The 

door flips toward the 

machine to open.

Cleaning with CleanShot

®

Press the CleanShot

®

 

button with your foot. The 

window of the button will 

be green and show an “I” 

symbol when it is on.

Spray will continue until you 

turn it off. To turn CleanShot

® 

off

, press the button with 

your foot. The window of the 

button will be red and show an 

“O” symbol when it is off.

Completely cover 

the stain with 

CleanShot

®

 spray. 

Allow the stain to 

soak. To extract, 

maneuver the foot 

of the machine 

over the stain to 

brush and remove.

1

2

3

4

1

2

Summary of Contents for REVOLUTION PET PRO 1964 series























Reviews: