6
w w w . b i s s e l l . c o m
Before you clean
1.
Plan activities to give carpet time to dry.
2.
Remove easily moved furniture (chairs,
lamps, coffee/cocktail tables, etc.) from
room if needed.
3.
Vacuum carpet thoroughly.
4.
Decide where to begin — and end — your
job. Clean in 3’ X 4’ sections, starting in
areas farthest from exit. Plan to leave a path
open to empty soiled water and refill cleaner.
5.
Carpeting will dry in three to four hours,
depending on carpet style and air circulation
in room. A floor fan speeds drying.
6.
Replace furniture on damp carpeting by
placing waxed paper under legs until floor
dries completely.
Fill the tank
1.
Remove the clean water/solution tank by lifting
it straight up, then away from the lower body.
2.
Unscrew the black cap at the bottom of the
clean water/solution tank.
3.
Add one of the BISSELL cleaning formulas
for deep cleaning machines to the formula
fill line on the clean water/solution tank.
Fill the rest of the tank with hand hot (not
boiling) tap water to the water fill line.
Replace and tighten the black cap.
4.
Place clean water/solution tank on
lower body.
5.
Rotate Quick Release Cord Wrap™ to release
the power cord and plug into an outlet.
O
peration
Tip:
Always vacuum thoroughly
before you deep clean. If pos-
sible, move large furniture to an
area you will not be cleaning.
WARnInG:
To reduce the risk of fire,
use only BISSELL cleaning
formulas for deep cleaning
machines. Use of cleaning
formulas that contain lemon
or pine oil may damage this
appliance and void warranty.
chemical spot cleaners or
solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in your
deep cleaner, causing
cracking or pitting.
Tip:
Deep cleaning spots,
spills and high traffic
areas on a regular basis
can prolong carpet life.
2