6
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean in 3’ X 4’
sections, starting in areas farthest from exit. Plan to leave a path
open to empty soiled water and refill cleaner.
Carpeting will dry in three to four hours, depending on
carpet style and air circulation in room. A floor fan
speeds drying.
Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
Remove the Clean Water Tank by lifting it straight up,
then away from the Lower Body.
Using the Formula Measuring Cap, add two (2) capfuls of
BISSELL
®
Advanced Cleaning Formulas for Deep
Cleaning Machines to the Clean Water Tank. Add 1/2-
gallon of hot (NOT boiling) tap water. Fill only to fill line –
do not overfill.
Replace and turn Formula Measuring Cap clockwise
until secure.
Place Clean Water Tank on Lower Body.
Rotate Quick Release Cord Wrap™ to release the Power
Cord and plug into an outlet.
Turn Power Switch [located on the side of the Lower
Body] to ( ) ON.
If cleaner starts when first plugged in, switch cleaner
OFF ( ) until ready for use.
How to begin
3.
4.
5.
Getting ready
1.
2.
6.
3.
4.
5.
6.
7.
Tip:
Always vacuum
thoroughly before
you deep clean.
If possible, move
larger furniture to
an area you will
not be cleaning.
How to use your BISSELL QuickSteamer
1.
2.
WARNING:
To reduce the risk of fire, use
only BISSELL Advanced
Cleaning Formulas for Deep
Cleaning Machines.
Use of cleaning formulas
that contain lemon or
pine oil may damage this
appliance and void warranty.
Chemical spot cleaners or
solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in
your QuickSteamer,
®
causing cracking or pitting.
6.
Power
Switch
2.
Formula
Measuring
Cap
Unscrew to Remove
printer spreads 3/7/03 4:07 PM Page 7
