w w w . b i s s e l l . c o m
T
roubleshooting
10
vacuum cleaner won’t run
Possible causes
Remedies
1.
Vacuum cleaner is not plugged in
1. Check electrical plug
2.
Power button is not pressed down
2. Press power button down
vacuum cleaner won’t pick up or low suction
Possible causes
Remedies
1.
Tools, flex hose and/or telescoping
1.
Remove each part and check for
extension wand are blocked
blockages
2.
Filters are dirty
2.
Check and clean or replace pre-motor
and post-motor filters
3.
Dust bag is full
3.
Replace with new dust bag
4.
Swivel hose not securely attached to
4. make sure swivel hose is locked into
suction opening
suction opening
5.
Crack or hole in flex hose
5.
Check hose and replace if needed
6.
Variable suction power control is set to
6.
Change to maximum setting
minimum setting
visible dust escaping from vacuum
Possible causes
Remedies
1.
Dust bag is full
1.
Replace with new dust bag
2.
Filters missing or installed incorrectly
2.
Check pre-motor and post-motor filters for
correct installation
3.
Filters are dirty
3.
Check and clean or replace pre-motor
and post-motor filters
4.
Flex hose is blocked
4.
Remove hose and check for
blockages
5.
Swivel hose not securely attached to
5.
make sure swivel hose is locked into
suction opening
suction opening
6.
Crack or hole in flex hose
6.
Check hose and replace if needed
other maintenance or service not included in the manual should be per-
formed by an authorized service representative.
thank you for selecting a bissell product.
Please do not return this product to the store.
WaRning:
To reduce the risk of electric shock, turn
power OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
