17
w w w . b i s s e l l . c o m
T
roubleshooting
DirtLifter PowerBrush does not turn
Possible cause
Remedies
1.
The brush belt or pump belt is off or broken.
1.
Refer to Remedy 4 on page 16 to check if
brush belt or pump belt is broken.
Cleaner not picking up solution
Possible cause
Remedies
1.
ReadyTools dial may be on the
1.
Set ReadyTools dial to either FLooR
wrong setting for the cleaning job.
CLEAnIng or TooLS.
2.
Poor tool position.
2.
Adjust angle; apply more
(Hand held attachments only).
downward pressure.
3.
Removable nozzle may not be properly attached.
3.
Make sure nozzle is on correctly by
slightly raising front of machine to line up
slots on the base of the machine with the
hooks on nozzle. Attach at base first and
then click nozzle into place. Refer to
image 5 on page 12.
4.
2-in-1 water tank lid is not properly installed.
4.
Re-install lid; refer to the images on page 10.
5.
2-in-1 water tank is not properly seated.
5.
2-in-1 water tank must be firmly seated to
function; remove and reseat 2-in-1 water tank.
6.
2-in-1 water tank has picked up maximum dirty water.
6.
Empty 2-in-1 water tank and refill, refer to
the operation section.
7.
The lint screen may be clogged.
7.
Clean out lint screen. Refer to page 12.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
