Troubleshooting
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
problem
possible causes
Remedies
Reduced
spray or
no spray
Water tank may be empty
Turn power off. Fill heavy duty
bladder with hot tap water.
Do
not boil or microwave water.
Tank may not be seated
completely
Turn power OFF. Remove and
reseat tank
Pump may have lost prime.
Turn power OFF and then back ON.
Wait one minute, then depress trigger
Dirtlifter®
powerbrush
does not turn
The belt is off or broken
Turn power OFF and unplug unit
from outlet. Follow instructions on
page 14
Circuit breaker on machine may
have tripped
Turn the machine OFF and unplug
from outlet. Check to see if foreign
object is caught in brush roll.
Remove object. Plug machine in to
reset circuit breaker
cleaner
not picking
up solution
Tank may not be seated properly
Turn machine off. Pick up the 2-in-1
water tank and re-seat it so it sits
snugly on the unit.
Tank may not be assembled
properly
Turn machine off. Make sure the tank
latches on both sides of the tank are
latched properly. To make sure they
are both latched properly, pick the tank
up by its handle.
2-in-1 water tank is empty
Turn machine off. Check fluid levels in
heavy-duty bladder.
2-in-1 water tank has picked up
maximum dirty water and red
float door has closed.
Turn machine off. empty 2-in-1 water
tank. Refill heavy duty bladder with
clean hot tap water and replace.
Red float "door" in the tank may
have closed as a result of bumping
object or moving machine back
and forth too quickly
Turn the machine OFF , allowing red
float door to release into the open
position. Turn unit back ON to
continue cleaning. be sure your
forward and backward strokes are
done at a slower pace.
Red lint screen near air duct
is dirty
Turn machine off. Follow cleaning
instructions in step 4 on Page 13.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
please do
not return
this product
to the store.
www.bissell.com
800.237.7691
16
