6
BISSELL.com
Cleaning Your Carpet
For additional carpet cleaning tips and tricks, visit
support.BISSELL.com
.
1.
Plug into a proper outlet and
press the Power Button.
2.
Press the gray recline pedal,
on the back of the machine in
between the wheels.
3.
Press the Spray Trigger and
make one slow forward wet
pass and another back. Do not
overwet.
4.
Release the Spray Trigger
and make one slow forward
and backward pass over the
same area.
5.
Repeat passes until solution
being suctioned up appears
clean. Continue passes without
pressing the Spray Trigger until
you can’t see any more water
being suctioned up. This helps
speed up dry time.
ATTENTION
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an
ordinary vacuum or carpet cleaner may aggravate this condition.
CAUTION
Take care not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
NOTE:
The ProHeat 2X® Lift-Off® Deep Cleaner may be equipped with a circuit breaker that automatically shuts off the brush if
a large or loose object catches in the Brush Roll. If that occurs, unplug your machine, remove the foreign object, and plug the
machine back in to reset circuit breaker.
