23
w w w . b i s s e l l . c o m
T
roubleshooting
Built-in heater ready light does not illuminate
Possible Cause
Remedies
1.
The heater switch is not turned
ON
(
I
).
1.
Turn the heater switch
ON
(
I
).
2.
The power switch is not turned
ON
(
I
).
2.
Both switches must be
ON
(
I
) to
activate the heater ready light.
Reduce Spray or No Spray
Possible Cause
Remedies
1.
2-in-1 water tank may be empty.
1.
Fill heavy duty bladder with hand hot
tap
water.
2.
Formula tank may be empty.
2.
Fill formula tank with BISSELL deep
cleaning
formula.
3.
2-in-1 water tank may not be
3.
Turn power switch
OFF
(
O
).
seated
completely.
Remove and reseat tank.
4.
Pump may have lost prime.
4.
Turn power switch
OFF
(
O
) and
then
back
ON
(
I
). Wait one minute,
then press spray trigger.
DirtLifter PowerBrushes do not turn
Possible Cause
Remedies
1.
The brush belt is off or broken.
1.
Turn power switch
OFF
(
O
) and
unplug
unit
from outlet. Follow
instructions on pages 21 & 22.
2.
The unit is in the upright position.
2.
Brushes only rotate when unit is
reclined
using the detent pedal.
3.
Circuit breaker may have tripped.
3.
Turn the power switch
OFF
(
O
) and
unplug from outlet. Check to see if
foreign
object is caught in brush roll.
Remove object. Plug machine back into
reset circuit breaker.
Scotchgard protector applicator tool is not spraying
Possible Cause
Remedies
1.
Cartridge is not connected to the tool
1.
Follow instructions on cartridge to
assure proper fit
2.
Ready Tools dial on floor setting
2.
Set Ready Tools dial to tools setting
3.
Formula clogging the spray tip
3.
Soak applicator tool only in hand hot
water. Spray without the cartridge
attached to purge any residual
formula left in the applicator tool
ug120-4042_9500E.indd 23
ug120-4042_9500E.indd 23
5/7/08 3:37:49 PM
5/7/08 3:37:49 PM
