Bissell PowerWash ProHeat 1698 SERIES User Manual Download Page 7

 7

SmartMix Continued

Replace SmartMix Bottle. 

Choose the SmartMix setting that fits the cleaning job.

Water Only

- use for gentle cleaning or for the final 

rinse after cleaning. 

Normal

- automatically provides the best mix of 

water and cleaning solution for most cleaning jobs.

High Traffic

- automatically mixes the right amount 

of water and cleaning solution to dissolve tough 
grime and heavy soil. Note: Residual cleaning 
materials left in carpet from other products may 
cause excessive foaming when picked up. If foam 
is overflowing Tank, move SmartMix Dial to “

Water 

Only

” position until the condition stops.

Note: Both the SmartMix Bottle and the clean 

water Tank must have liquid in them in 
order for the machine to spray. If one is 
empty, the machine will temporarily lose 
its prime and will not spray cleaning 
solution or water only. 

Important: If you are using the WATER ONLY 

setting, fill the SmartMix Bottle with 
water also!

The powered brush roll at the Floor Nozzle is designed to 
enhance cleaning performance. The bristle pattern lifts out 
the deep down dirt while gently grooming carpet fibres. The 
floating suspension self-adjusts to all carpet heights. When 
the machine handle is in the fully upright position, Carpet 
Saver™ automatically raises the brush off the carpet and 
protects your carpet if you leave the Power Switch ON.

4.

5.

Tip:

Deep cleaning 

stairs and high 
traffic areas on a 
regular basis 
can prolong 
carpet life.

DirtLifter

 PowerBrush

 WARNING: 

To reduce the risk of fire, 
use only BISSELL Advanced 
Deep Cleaning Formulas for 
full size machines in your 
PowerWash ProHeat. Use 
of cleaning formulas which 
contain lemon or pine oil 
may damage this appli-
ance and void the warranty. 
Chemical spot cleaners or 
solvent based soil removers 
should not be used. These 
products may react with 
the plastic materials used 
in your PowerWash ProHeat, 
causing cracking or pitting.

SmartMix 
Dial

HIG

TRAFFIC

W

ATER O

NL

Y

NORM

AL 

Summary of Contents for PowerWash ProHeat 1698 SERIES





















Reviews: