Bissell POWERWASH LIFT-OFF 1190, User Manual

Page: 11 / 12

Problem Possible causes Remedies
Upright
cleaning
mode
indicator light
does not
illuminate
Power is not turned ON Power must be ON to activate indica-
tor light
Portable spot cleaner is not
attached completely
Make sure portable spot cleaner is
attached. Push down firmly to check.
Reduced
spray or
no spray
Formula & water tank may be empty Refill tank
Formula & water tank may not be
seated completely
Turn power OFF. Remove and
reseat tank
Pump may have lost prime in
portable spot cleaning mode
Hold end of hose below water level
in tank to prime
Portable spot cleaner is not
attached completely
Push down firmly to check connection
DirtLifter™
PowerBrush
does not turn
Portable spot cleaner is not
attached completely
Make sure portable spot cleaner is
attached. Push down firmly to check
Machine is in the upright position Brushes only rotate when machine is
reclined using recline pedal
Circuit breaker on machine
(if equipped) may have tripped
Turn machine OFF and unplug from
outlet. Check to see if foreign object
is caught in brush roll. Remove object.
Plug machine in to reset circuit breaker
Belt is off or broken Turn power OFF and unplug unit
from outlet. Follow instructions in
sections D-3 and D-4
Loss of
suction
power
Tanks may not be seated properly Pick up both tanks and reseat so they
fit snugly on the unit
Nozzle may not be assembled
properly
Unplug machine and check to make
sure "lip" of nozzle is securely hooked
into groove on bottom of machine.
Follow instructions in section C-5
Portable spot cleaner is not
attached completely
Make sure portable spot cleaner is
attached. Push down firmly to check
Dirty tank has picked up
maximum amount of dirty water
and has reached full line
Empty dirty tank
Formula & water tank is empty Check fluid levels in formula & water tank
Suction gate is open Check to make sure suction gate is
closed. Follow instructions in section D-1
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do
not return
this product
to the store.
11
To reduce the risk of electric shock, turn power
switch off and disconnect plug from electri-
cal outlet before performing maintenance or
troubleshooting checks.
E
Troubleshooting
www.BISSELL.com