5
Assembly
Your steam mop assembles quickly and easily.
It is packaged with the following items:
Handle Assembly with one screw
Lower Body
Maneuverable Mop Head
Removable Water Tank
Removable Easy Scrubber
(attached to mop head)
Mop Pads (quantity may vary)
1.
Attach lower body to mop head by
snapping it into place.
2.
Slide handle assembly down and screw
until tightened.
Steam mop assembly is now complete.
WARNING
Do not plug in your hard floor cleaner until
you are familiar with all instructions and
operating procedures.
WARNING
Exercise extreme care when using your
steam mop on hardwood floors. Prolonged
application of steam in one area increases
the risk of damage to the surface treatment
on timber floors. Test steam mop in an
inconspicuous area before mopping a
large area. The steam mop generates hot
steam, so move the unit continuously when
depressing the trigger. The trigger does not
need to be depressed at all times.
Regular foot traffic and direct sunlight will
wear down timber floor surface treatment,
making it more susceptible to steam
damage. Check with your timber floor
treatment and application specialist prior
to steam mop operation.
Handle Assembly
Maneuverable Mop Head
Removable
Water Tank
Lower Body
1.
2.
www.bissellcommercial.com
