background image

T

roubleshooting

Visible dirt escaping from cleaner (continued)

Possible causes  

Remedies

3.

  Dirt container installed incorrectly 

3.

  Position correctly and lock into place

4.

  Filter cup installed incorrectly 

4.

  Remove dirt container and make sure filter 

  

 

cup is fully attached

Other maintenance or service not included in the manual should be performed by an 

authorized service representative.

Thank you for selecting a BISSELL product.

Please  do  not  return  this  product  to  the  store.             

14

w w w . b i s s e l l . c o m  

B

ISSELL Consumer Services

If your BISSELL product should require service:

In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give 
you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local 
in country distributor for questions, service, or repair. 

If you have questions about your warranty or need replacement parts please contact the numbers below.

Or visit the BISSELL website - 

www.bissell.com

When contacting BISSELL, have model number of unit available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a 

warranty claim. See Warranty on page 16 for details.

Please do not return this product to the store.

For UK inquiries:

Monday - Thursday  9 am — 5 pm 
 

Friday  9 am — 4 pm 

BISSELL Homecare (Overseas) Inc.

The Boat Yard 
105 Straight Road 
Old Windsor 
Berkshire, SL4 2SE
United Kingdom 
Telephone: 0870-225-0109 

For Australian inquiries:

Monday - Friday    9 am — 5 pm 

BISSELL AUSTRALIA PTY LIMITED

Unit 35
15 Ricketts Road
Mount Waverley, Victoria 3149
Australia
Telephone: 1-800-811-183 

For all other inquiries:

Monday - Friday    8 am — 4 pm 

BISSELL Homecare, Inc.

PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451 
Fax: 01-616-453-1383

For New Zealand inquiries:

Monday - Friday    9 am — 5 pm 

Parex Industries Ltd.

5 Tolich Place
Henderson 0610
Auckland
New Zealand
Telephone: 0800-247-735 

ug110-4049_82H5_1008.indd   14

ug110-4049_82H5_1008.indd   14

10/14/08   2:41:01 PM

10/14/08   2:41:01 PM

Summary of Contents for POWERFORCE TURBO

















Reviews: