Bissell PowerClean Rewind User Manual Download Page 13

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

13

T

roubleshooting

Vacuum cleaner won't turn on

possible causes 

Remedies

1.  Power cord not plugged in 

1.  Check electrical plug

2.  Blown fuse/tripped breaker 

2.  Check/replace fuse or reset breaker

3.  Damaged cord 

3.  Refer to a BISSELL authorized service center for repair or  

  

 

replacement

Vacuum cleaner won't pick up

possible causes 

Remedies

1.  Clog in hose or elsewhere in vacuum 

1.  Follow instructions on page 11 for clearing clogs

2.  Filters are dirty  

2.  Check and clean or replace pre-motor and post-motor filters, 

 

 

  see pages 8 & 9

3.  Dirt container is full 

3.  Empty dirt container

4.  Hose not attached properly 

4.  Grasp quick reach handle and firmly push hose wand onto  

 

 

  the hose wand base

5.  Dirt container or upper tank not installed properly 

5.  Position correctly and lock in place

6.  Incorrect height adjustment 

6.  Adjust powerfoot to correct height setting

7.  Crack or hole in hose 

7.  Check hose and replace if needed

8.  Broken or worn drive belt 

8.  Replace drive belt, see page 10

9.  Rotating floor brush jammed 

9.  Remove brush and clean debris from brush ends

10.  Rotating floor brush bristles worn 

10. Replace brush

Tools won't pick up

possible causes 

Remedies

1.  Clog in hose or elsewhere in vacuum 

1.  Follow instructions on page 11 for clearing clogs

2.  Filters are dirty 

2.  Check and clean or replace pre-motor and post-motor 

 

  

   filters, see pages 8 & 9

3.  Dirt container is full 

3.  Empty dirt container

4.  Dirt container or upper tank not installed properly 

4.  Position correctly and lock in place

5.  Crack or hole in hose 

5.  Check hose and replace if needed

Visible dirt escaping from cleaner

possible causes 

Remedies

1.  Dirt container full 

1.  Empty dirt container

2.  Filters missing or installed incorrectly 

2.  Check pre-motor and post-motor filters for correct installation

cord will not retract

possible causes 

Remedies

1.  Knotted or twisted 

1.  Follow instructions on page 6

other maintenance or service not included in the manual should be  

performed by an authorized service representative.

thank you for selecting a bissell product.

please  do  not  return  this  product  to  the  store.             

for any questions or concerns, bissell is happy to be of service. 

contact us directly at 1-800-237-7691.

Summary of Contents for PowerClean Rewind

















Reviews: