12
www.BISSELL.com.au
6
Clean or replace the Brush Roll and Belt. When finished cleaning these parts, reassemble
them to the machine.
Insert the brush into the right side end cap. Adjust the right side of the brush into place
and tuck the left Brush Roll Cap (separate piece that attaches to Brush Roll) into place.
7
8
Maneuver the Belt to wrap
around the pulley. Wrap the Belt
around the cog of the Brush
Roll. Secure the Brush Roll into
place by sliding the square piece
to align the Brush Roll.
Reattach Belt Cover and screw into place.
Replacing Belts & Brush Rolls (continued)
NOTE:
Manually rotate brush to make sure it rotates freely and the Belt is aligned.
Brush Roll
Washers
Brush Roll
End Cap
left
side
right
side
