MAX FULL
FORMULA
1.
Remove the clean water
tank, dirty water tank and
suction lens.
2.
Use a flathead screwdriver
to push the piece on the base
of the machine open.
3.
Remove the piece on the
other side.
4.
Push the two hooks at the
base of the machine inward.
5.
Pry off the back cover.
6.
Pry off the upper cover with
a flathead screwdriver. You
may need to lift from multiple
spots to keep the material
from breaking.
7.
Release the four locks to
remove the PCBA cover. You
may need to use a flathead
screwdriver to pry it off.
8.
Remove the screw on the
PCBA plate with a Phillips-head
screwdriver.
9.
Remove the DC jack cover
and spring.
Disposing of the Battery
Go to
support.BISSELL.com
for resources on battery disposal.
Before disposing the battery, make sure:
• The machine is OFF and disconnected from the charger.
• The Clean and Dirty Water Tanks are empty or removed from the machine.
• A Phillips-head screwdriver, flathead screwdriver, electrical tape, and rubber handled wire cutters
are available for disassembly.