12
BISSELL.com
1
3
4
2
Remove Brush Roll, belt and paddle
wheel. Inspect for damages and
replace if necessary.
To reassemble, align two clips on each end
of paddle wheel with belt and pop back into
place. Place Brush Roll with belt back in.
Faceplate will not close properly if all parts
are not aligned correctly.
To put faceplate back on, align the tabs
in the top of the cover and place it down
to “click” into place.
Paddle Wheel
Belt
Roller
Twist gray collar
counter-clockwise, until
slot appears, and then
separate faceplate.
2
1
3
Hold the Dirt Tank over
a trash container. Press
the bottom release
button to empty.
Twist cyclone counter-
clockwise and pull down
to remove from tank.
Tap separator against
inside of trash container
and rinse under warm water,
if necessary. Be sure to let
it dry completely before
placing back in Dirt Tank.
Cleaning the Inner Cyclone Separator
Maintaining the Pet TurboEraser® Tool
