Bissell OptiClean 42Q8 Series User Manual Download Page 3

w w w. b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

I

MPORTANT SAFETY INSTRUCTIONS

 3

When using an electrical appliance, 

basic precautions should be observed, 

including the following: 

READ ALL  

INSTRUCTIONS 

BEFORE USING YOUR  

CANISTER VACUUM. 

 

Always connect to a polarized outlet  

(left slot is wider than right). Unplug 

from outlet when not in use and before 

conducting maintenance. 

  

WARNING:

 To 

reduce the risk of fire, 

electric shock, or injury:

 

 Do not leave cleaner when it is 

plugged in.

 Unplug from outlet when not in use 

and before servicing.

 Do not use with damaged cord or plug.

 To unplug grasp plug not cord. 

 Do not pull or carry by cord, use cord as 

a handle, close door on cord, pull cord 

around sharp corners, run cleaner over 

cord, or expose cord to heated surfaces.

 Hold plug when rewinding the cord 

onto the reel. Do not allow the plug 

to whip when rewinding.

 Do not use cleaner if it has been 

dropped, damaged, left outdoors or 

dropped into water. Have it repaired 

at an Authorized Service Center.

 Do not allow children to use as a toy.

 Do not use outdoors or on wet surfaces.

 Do not handle cleaner or plug with 

wet hands.

 Do not put any object into openings, use 

with blocked opening, or restrict air flow.

 Do not use without dust bag and/or 

filters in place.

 Do not allow hair, loose clothing, fingers 

or body parts to get near openings or 

floor brush in the appliance.

 Do not pick up hot coals, cigarette 

butts, matches or any hot, smoking, 

or burning objects.

 Do not pick up hard or sharp objects 

such as glass, nails, screws, coins, etc.

 Do not pick up flammable or combus-

tible materials (lighter fluid, gasoline, 

kerosene, etc.) or use in the presence 

of explosive liquids or vapor.

 Do not unplug by pulling on cord.

 Do not pick up toxic material (chlorine 

bleach, ammonia, drain cleaner, etc.).

  Do not use in an enclosed space filled 

with vapors given off by oil base paint, 

paint thinner, some moth proofing 

substances, flammable dust, or other  

explosive or toxic vapors.

  Do not use for any purpose other 

than described in this User’s Guide.

  Always turn off this appliance before con-

necting or disconnecting vacuum hose.

  Use only manufacturer’s  

recommended attachments.

  Use only on dry, indoor surfaces.

  Keep openings free of dust, lint, hair, etc.

  Keep appliance on a level surface.

  Turn off all controls before plugging 

or unplugging cleaner.

  Be extra careful when cleaning 

stairs.

  Close attention is necessary when 

used by or near children.

SAVE THESE  

INSTRUCTIONS 

FOR FUTURE USE

THIS APPLIANCE 

HAS A POLARIZED 

PLUG.

To reduce the risk of electric shock, 

this appliance has a polarized plug (one 

blade is wider than the other). This plug 

will fit in a polarized outlet only one 

way. If the plug does not fit fully in the 

outlet, reverse the plug. If it still does 

not fit, contact a qualified electrician to 

install a proper outlet. Do not change 

the plug in any way.

This model is for household use only.

Summary of Contents for OptiClean 42Q8 Series

















Reviews: