BISSELL.com
5
Spot Cleaning Carpet & Upholstery
1.
Remove the Clean Water
Tank by lifting it straight
up and then away from the
machine.
2.
Unscrew the black cap at
the bottom of the tank.
3.
Follow the fill lines on tank
to add the correct amount of
warm tap water (140°F/60°C
MAX), formula, and 30mL of
BISSELL® Boost if preferred.
Do
not boil or microwave water.
4.
Replace the tank by lining
up the vertical guides on the
left side of the machine with
the indentations on the tank
and slide it down into place.
5.
Attach the Tough Stain Tool
to the handheld cleaning hose.
6.
Plug in the machine and
press the Power Switch beneath
the handle to turn it on.
7.
Optional: Pretreat the spot
or stain. Press the trigger to
spray solution directly onto the
soiled area. Wait 3-5 minutes
before cleaning.
8.
Hold tool about 2.5 cm
above soiled surface. Press
spray trigger to apply cleaning
solution. Release trigger, apply
downward pressure, and pull
toward you to suction up dirt
and cleaning solution. Do not
overwet.
IMPORTANT:
Check the manufacturer’s tag before cleaning upholstery. If manufacturer’s tag is missing or not coded, check with
your furniture dealer. Test a small, hidden area for colourfastness and examine when dry. If colour is aff ected do not use. Do not
use on silk or velvet.
WARNING
Keep spray away from face. Failure to do so may result in personal injury.