w w w . b i s s e l l . c o m
9
O
perations
To begin cleaning
1.
Place the filled clean water/solution
tank onto the unit.
2.
Plug your Healthy Home Spot Clean in.
The power light will illuminate, indicating
your Healthy Home Spot Clean is ready to
go.
Automated cleaning
1.
Place the unit directly over the spot or
stain, making sure the stain is in the
center of the cleaning area.
2.
Select which cleaning cycle (surface
stain or set-in stain) you would like to
use. Healthy Home Spot Clean will begin
spraying, brushing and suctioning the
soiled area, in a pre-programmed cycle.
Both cycles have been tested and prov-
en to deliver superior cleaning results,
taking the guesswork and effort out of
cleaning for you.
3.
When the cleaning cycle you have
selected is complete, the Healthy Home
Spot Clean will beep. The beep will con-
tinue until you press the
STOP
button.
4.
Pick up the unit and check the area that
was cleaned.
5.
If you use Oxy GEN2, it will continue
to work for the next six to eight hours,
cleaning your spots and stains all the
way to the backing of the carpet.
Tip:
Some difficult stains may
require that you run the
cleaning cycle a second
time.
Tip:
If the unit accidentally tips
or is tilted, the handsfree
cleaning brushes will stop.
