BISSELL.com
7
Please read “DIRECTIONS FOR USE” on Hard Floor Sanitize formula label. Use on hard nonporous
floors only.
5m
1.
Remove visible soil before
cleaning. Hold trigger down to
apply solution on to the floor.
2.
Allow formula to remain wet
on the floor for five minutes.
3.
With the spray trigger
released, make forward and
backward passes to extract
solution.
ATTENTION
Do not overwet carpet or hardwood floors. Be careful not to run over loose objects or edges of area
rugs. Stalling the brush may result in premature belt failure.
Cleaning with Hard Floor Sanitize Formula
Visit
support.BISSELL.com
to watch additional how-to videos.
Emptying the Dirty Water Tank
Go to
support.BISSELL.com
for a full list of how-to videos.
1.
Press the button on top of
the tank, grab the front handle
and pull the tank out.
2.
Hold the top of the tank
near the sides of the filter and
pull up to remove.
3.
Remove strainer from tank
and throw debris in trash.
4.
Pour dirty water down the
sink and rinse the tank.
