w w w. b i s s e l l . c o m
9
O
perations
Before you clean continued
5.
Pretreating (optional)
Pretreating is recommended to
improve cleaning effectiveness
for heavily soiled carpet in high
traffic areas such as entry ways
and hallways.
To pretreat:
A.
Using the BISSELL Tough Stain
Precleaner, generously spray evenly
over soiled area, do not overwet.
B.
Wait 3-5 minutes before deep
cleaning.
C.
Clean as normal using your BISSELL
deep cleaner.
Fill the 2-in-1 water tank
1.
Remove the tank from the base of the
machine by lifting the tank carry handle.
2.
Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove
lid, turn over and locate built in measuring
cup.
3.
Fill with BISSELL 2X formula to the indi-
cated fill line on the built in measuring
cup and pour into mouth of the bladder.
4.
Fill the bladder with clean hand hot tap
water.
*Do not boil or microwave water
as it can destroy the bladder.
5.
Replace the top of the tank by matching
the lid and tank edges. Handle must
be in the forward position in order to
replace lid. Rotate the handle to the car-
rying
position to latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6.
Place tank into machine base, seating
firmly in place. Rotate tank handle back
into latched position.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition.
1.
3.
5.
2.
4.
6.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning formulas
intended for use with the deep
cleaner. Non-BISSELL cleaning
formulas may harm the machine
and void the warranty.
