6
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Handle position
Press the handle release pedal with your foot
to place your Cleanview Helix into one of three
cleaning positions.
1.
Upright
For storage and above
floor cleaning with tools.
2.
normal cleaning
Press handle release
pedal once. Use for most
household floor cleaning
tasks.
3.
low cleaning
With the vacuum in
normal cleaning position,
press handle release
pedal again, use for
reaching under low
furniture such as tables,
chairs or beds.
Height adjustment
the powerfoot/Rotating floor brush can be
adjusted to clean several floor surfaces.
notE: for optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1.
Place handle in upright position.
2.
Turn height adjustment knob to desired setting.
lowest Setting
For bare floors.
Medium Settings
For short and medium
pile carpets.
Highest Setting
For plush pile carpet.
3.
Place the handle in the normal cleaning
position and the Powerfoot will adjust to the
setting chosen.
notE: you may also adjust the setting while
in the normal cleaning position.
O
peration
caUtIon:
before using your vacuum,
make sure that the dirt con-
tainer is in locked position and
that all filters (inner circular,
outer circular, pre-motor and
post-motor) are in place. Do
not operate your vacuum with-
out these filters.
Tip:
Your vacuum features
a Quick Release cord
wrap. To remove the
power cord quickly
and easily, rotate
the upper cord wrap
towards floor, and
slip power cord from
upper and lower
cord wraps.
Tip:
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the
vacuum hose.
Tip:
Hair, string and small
objects can block
the vacuum hose or
tools. Check them
occasionally for
obstructions.
