manualshive.com logo in svg

Bissell BIG GREEN 48F3G, User Manual, Page: 3 / 12

Share
Download
Bissell BIG GREEN 48F3G User Manual Download Page 3

3

BISSELL.com

Thanks for buying a BISSELL

®

  cleaner

We love to clean and we’re excited 

to share one of our new innovative 

products with you. We want to 

make sure your cleaner works as 

well as it does today for years to 

come. This guide has tips on using, 

maintaining, and if there is a problem, 

troubleshooting.

Safety Instructions. . . . . . . . . . . 2

Product View. . . . . . . . . . . . . . . .4

Cleaning Formulas. . . . . . . . . . . 5

Operations  . . . . . . . . . . . . . . . .5-8

Maintenance & Care  . . . . . . 9-10

Troubleshooting . . . . . . . . . . . . .11

Guarantee . . . . . . . . . . . . . . . . . . 12

Consumer Care. . . . . . . . . . . . . 12

»   Cleaning stairs and high-traffic areas on a regular 

basis helps prolong carpet life. 

»  Check upholstery stuffing before cleaning. Coloured 

stuffing may bleed through the fabric when it 

becomes wet.

»  Before turning OFF the machine, suction up clean 

water to thoroughly rinse out the interior of the flex 

hose. Then, lift the cleaning tool and point it upwards 

to drain any remaining water into the Dirty Water Tank.

Tips

Summary of Contents for BIG GREEN 48F3G













Reviews:

No comments