8
7
3
1
-
2
4
2
-
0
0
8
-
1
m
o
c
.
l
a
i
c
r
e
m
m
o
c
l
l
e
s
s
i
b
.
w
w
w
9
WARNING: Unplug cord from elctrical outlet before servicing.
MAINTENANCE
CHECKING THE DRIVE BELT
1) Remove the screw located on side of
power head.
2) Slide the door forward by prying open
with a screwdriver or coin.
3) Remove the belt from the brush roll pulley
and the motor drive shaft, clean the residue off
4) Loop the new belt over the motor
drive shaft. Place the opposite end of
the belt on the brush roll pulley.
5) Rotate the brush roll several complete
revolutions to ensure that no part of the belt is
overhanging the end of the motor drive shaft.
6) Slide the door back and replace
screw.
ewdriver or coin.
op the new belt over the motor
shaft. Place the opposite end o
elt on the brush roll pulley.
tate the brush roll several complete
utions to ensure that no part of the belt is
h
d f h
d
h f
6) Slide the door back and replace
p
3) Remove the belt from the brush roll pulley
and the motor drive shaft, clean the residue off
the bruslh roll pulley if needed.
