w w w . b i s s e l l c o m m e r c i a l . c o m 8 5 5 . 5 4 4 . 7 3 3 6
A
ssembly
5
4.
3.
2a.
2b.
6.
1.
Plug end of the yellow power cord into
the top of the unit.
2.
slide handle into the slot on top of main
body of vacuum making sure the cord is
secured under the upper cord lock. see
image 2a and 2b.
3.
locate the lower cord lock and place
over screw hole as shown. secure with
thumbscrew provided.
4.
Plug cord into outlet on top of unit.
secure cord into lower cord lock as
shown.
5.
install the hose by pushing one end into
the top of the housing. Push opposite
end in to the wand. Place the open end
of wand over the opening of the power
brush housing and push the wand into
the sleeve in the back of the bag housing
until you hear it click.
6.
Place accessories onto the tool caddy.
7.
before turning your bg11 on, make
sure a bag is installed. see installation/
Removal of dust bag for detailed instruc-
tions on how to install a vacuum bag
1.
check to see if a bag is installed in the
unit. Refer to installation/Removal of dust
bag for detailed instructions.
2.
Power switch on top of unit should be in
“off” position. Plug cord into an electri-
cal outlet.
3.
adjust the carpet height by turning round
knob near the foot of the vacuum to the
carpet height that best suits the carpet
area you are going to clean
4.
turn machine to “on” position.
5.
to detent the handle, push on yellow
release pedal. When the handle is in the
detent position the brush motor will start
rotating.
6.
you can now begin to vacuum.
O
perations
