(6) BISSELL BGHIP6A 6-Quart HipVac
BISSELL BGHIP6A 6-Quart HipVac (11)
1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury Continued
• DO NOT use without the proper cloth filtration bag, paper filter bag and other filters in
place. Failure to do so, will VOID your warranty.
• DO NOT use the vacuum to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
• Use extra care when cleaning on stairs.
• DO NOT use where oxygen or anesthetics are used.
• Turn off all controls before unplugging. Make sure the on/off switch is in the OFF
position.
• The extension cord provided with this unit is 50-foot, 16/3-gauge wire and MUST be
used with this unit to ensure grounding protection.
• Replace damaged or worn parts immediately with genuine, original equipment parts to
maintain safety and to protect your limited warranty.
• DO NOT lubricate the motor.
• DO NOT tie extension cord to pigtail cord. This will damage the cord and will not be
covered under warranty.
• DO NOT overstretch the safety power cord between the vacuum and the electrical
outlet in the wall.
• DO NOT use without all filters correctly secured in place.
• When using the vacuum with a powerhead tool and connection, always turn off the
vacuum and nozzle tool before connecting or disconnecting either the hose or power
nozzle. Depending on your vacuum model, the hose may contain electrical wires.
DO NOT use when damaged, cut or punctured.
Always turn OFF the vacuum before connecting, disconnecting or working on the
vacuum. This vacuum must be connected to a properly grounded outlet only (see
grounding instructions).
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK.
Electrical equipment must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce the risk of
electric shock. The vacuum is equipped with a cord containing a grounding conductor
and grounding plug. The plug must be inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a flat bed terminal. The wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
6.0 Machine Schematic Drawing
