www.BISSELL.com
7
Preparing Your Cleaner
Flip the tank so the
black cap is on top
and unscrew. Pull
up to remove cap
assembly from tank.
Remove the clean
water tank by
lifting it straight
up and then away
from the unit.
1
2
4
To ensure your pet
has a nice bathing
experience, use warm-
to-the-touch tap
water to the fill line
on your clean water
tank. Replace the cap
before returning the
tank to the machine.
Replace the clean
water tank by lining
up the grooves on
the clean water
tank with the
vertical guides
on the side of the
unit. Gently slide it
down into position.
3
WARNING
To reduce the risk of injury to your pet, do not boil or microwave water. Use only warm tap
water.
Plug the unit in
and press the
power switch to
ON ( I ) position.
Before connecting
the bathing tool, you
will need to prime the
system. Place the unit
on a high, flat surface
(such as a table or
counter top).
Hold the flex
hose end over the
microfiber mat or
towel and press the
trigger at the end
of the flex hose
for 15-20 seconds
to allow water to
dispense.
5
6
8
Turn the unit OFF,
pressing the power
switch to ( O )
OFF position.
7