Bissell air 3001F, Operator'S Manual

Page: 8 / 12

8
Replacing the Filters
1. If your digital display is
showing F-1 and/or F-2, this
means that either one or both
of your filters needs to be
replaced.
F-1:
HEPA filter
F-2: Carbon filter
F-1 and F-2:
Both filters
2. Replace the filters following
steps 1-4 on page 6.
3. After replacing your filter(s),
press and hold down the
power button for 3 seconds to
reset the filter(s). Once reset,
your air220 will beep and the
F-1 and/or F-2 will no longer
show on the digital display.
Filter life varies based on run time and existing air conditions. It is recommended to replace both
the HEPA and activated carbon filters once every six months. It is also recommended to occasionally
vacuum the front panel to remove dust.