w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
8
using the tools
1.
Make sure the cleaner is in the upright
position.
2.
Remove the hose wand from the wand
base. This automatically diverts the
suction to the hose. Unwrap the hose from
the cleaner.
3.
Use the hose and wand alone or attach
any of the tools to the end of the hose
wand.
turbobrush
use rotating brush action for small
areas such as stairs and upholstery.
note: press gently when using the
turbobrush to gain maximum
cleaning. too much pressure could
cause the brush to stop rotating.
combination brush
use longer soft bristles for dusting.
Remove long bristle portion and use
shorter stiff bristles when agitation is
needed to remove debris.
upholstery tool
use shorter stiff bristles when agitation
is needed to remove debris.
crevice tool
use in tight narrow spaces
telescoping extension wand
use with desired attachment for a
longer reach. to extend the wand, twist
the collar to “unlock” and push away
from you. twist the collar to “lock”
to lock into place. to retract, twist to
unlock, pull toward you and twist to
relock.
all available items may not be included
with your model. other tools are
available; to order, please refer to page
18-19.
attention:
Always place the vacuum
cleaner on the floor in its fully
upright position when using
tools. Placing the vacuum in
this position automatically
stops the rotating brush.
caution:
To avoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottom of the stairs.
2.
