background image

This user’s guide has been designed to help you 
get the utmost satisfaction from your BISSELL 
AromaPro. You’ll find assembly and operating 
instructions, safety precautions, as well as 
maintenance and troubleshooting instructions. 
Please read this user's guide thoroughly before 
assembling your deep cleaner. 

Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before assembly. Familiarize 
yourself with the parts and where they go. 
Following this user’s guide will greatly enhance 
your ability to get the most performance from your 
BISSELL AromaPro for many years.

Your

 

AromaPro comes in three, easy to 

assemble components: 

Upper Handle
Lower Handle
Tool Caddy 

The only thing you will need to assemble your 
cleaner is a Phillips head        screwdriver.

Refer to Assembly Diagram on page 5 

1. 

Slide upper handle onto lower handle.

2.

 

Feed bundled power cord through tool caddy from 
caddy’s flat side.

3.

 

Align upper handle holes and tool caddy holes.

4.

 

Place hex nut into back of tool caddy and hold in 
place. Insert bolt from front to back, turning into 
the hex nut until snug. Do not over tighten. Repeat 
for the second bolt and hex nut.

5.

 

Insert 2 screws into lower 2 holes. Turn until snug.

6.

 

Snap tools into storage on the tool caddy.

7.

 

Wrap power cord and flex hose as shown in figure 7.

AromaPro assembly is now complete.

H

ow to use this guide

 6

w w w . b i s s e l l . c o m

 WARNING: 

Do not plug in your cleaner 
until you have completely 
assembled it per the 
following instructions 
and are familiar with all 
instructions and operating 
procedures.

ON

OFF

7

1

2

3

4

5

ON

OFF

6

A

ssembly

S

pecial features

Your BISSELL AromaPro deep cleaner is a home 
cleaning system that automatically mixes hand 
hot tap water with BISSELL deep cleaning 
formulas and heats the solution as it is applied 
to the carpet. The combination of heated solution, 
rotating brushes and powerful suction provide a 
safe and effective method of cleaning.

ug310-5822_8910E_107.indd   6

ug310-5822_8910E_107.indd   6

1/7/07   8:43:51 AM

1/7/07   8:43:51 AM

Summary of Contents for 8910 - AUTRE





















Reviews: