Pre-Motor Filter
6
Operating/Maintenance Instructions for your BISSELL Compact Canister
Vacuum Cleaner
Cord Storage
To
extend the Power Cord for use, grasp the plug and gently
pull out from the vacuum cleaner
. When removing the Power
Cord from the electrical outlet, switch off the power and grasp
the plug. Y
our cleaner is equipped with an automatic rewind
button. When cleaning is finished, switch off power and
disconnect the plug from the electrical outlet, then press
on the Cord Rewind Button with your hand. The Cord will
be rewound automatically
.
Full Bag Indicator
You may continue cleaning until the Full Bag Indicator
changes into the red colour
. This means the dust bag is full and
needs to be replaced. If the indicator suddenly works and the
cleaner loses suction power while in use, turn your cleaner off
and check whether the hose, pipe or nozzle is clogged.
Dust Bag Replacement
NOTE: Hose must be disconnected before changing bag.
Replace the dust bag as soon as it is full.
1.
To
open the Dust Bag Compartment Door
, lift the
cover upward.
2.
Remove the dust bag from the cleaner
.
3.
Dispose of the full bag and insert the cardboard bag collar
of the dust bag as far as it can go on the suction inlet, and
press down the locker
. Position the dust bag so that no part
of the bag is pinched.
4.
The Pre-motor inlet Filter is changed by sliding the Filter
Bracket upward, and sliding the Filter out/in.
5.
Press the front of the Dust
Bag Compartment Door
down lightly until it re-locks.
6.
The Post Motor Filter is changed
by sliding the holder down and
removing/replacing the Filter
.
Storage
Your cleaner is designed to stand firmly upright for cleaning
and storage. Use in this manner and it takes up a minimum of
space, and allows you to work in the narrowest spaces.
Tool Storage
Yo
ur cleaner features a tool
storage space. It can be used
to store the cleaning tool
while it is not in use.
Dust Cup
Your cleaner features a
Dust Cup for cleaning
and emptying convenience.
When cup is full, remove
and empty as shown.
7
W
ARNING:
Hold
plug when rewinding the cord
onto the reel. Do not allow
the cord to whip when
rewinding.
Dump Dust
1.
2.
4.
6.
Post-Motor Filter
