w w w. b i s s e l l . c o m
o
perations
6
Power Switch
T
he power switch is located on the left side
of the vacuum. Push the rocker switch
“ON” (1) to vacuum, and “OFF” (0) when
cleaning is complete.
Handle position
Press the handle release pedal, located on
the lower left side of the vacuum, with your
foot to place your vacuum into one of three
cleaning positions.
1. Upright-
For storage and above floor
cleaning with tools.
2. Normal Cleaning-
Press handle release
pedal once. Use for most household floor
cleaning tasks.
3. Low Cleaning-
With the vacuum in
normal cleaning position, press handle
release pedal again. Use for reaching
under low furniture such as tables, chairs
and beds.
Pet Hair Lifter
Use to pick up pet hair from carpeted surfaces.
Just vacuum like you normally would. The
vacuum will grab pet hair when you pull back
and it will release hair and suction it up when
you push forward.
Transporting cleaner
To move your vacuum from room to room, put
the handle in the upright position, tilt the vacuum
back on its rear wheels and push forward.
The vacuum can also be moved by using the
carry handle.
1
2
Pet Hair Lifter
CAUTION:
Before using your vacuum, make
sure that the dirt container is in
locked position and that all filters
(inner cyclone, foam filter, and
HEPA Media filter*) are in place.
Do not operate your vacuum
without these filters.
