background image

7

All Models

To maintain maximum performance from your BISSELL

®

Upright Vacuum Cleaner, perform these simple maintenance
checks at least once a month.

Routine maintenance

Replace Dust Bag

WARNING:

To

reduce the risk of electric
shock, turn Power Switch 
OFF and disconnect 
polarized plug from 
electrical outlet before 
performing maintenance or
troubleshooting checks.

To maintain peak vacuum efficiency, you should check the Dust
Bag weekly, and replace it when it is no more than half full.

Never reuse a paper Dust Bag.

1. Unplug cleaner from electrical outlet.
2. Unzip Cloth Bag.
3. Grasp paper Dust Bag and Bag Collar, pull used Dust Bag

from Connector Tube, and dispose of Dust Bag.

4. Fold down top of new Dust Bag. 
5. Grasp Bag Collar and push Collar firmly over raised rib on

Connector Tube. Pushing too hard on the Collar may rip
the Dust Bag.

6. Tuck remainder of Dust Bag completely into vacuum 

cleaner. Lay it flat, top to bottom, without bunching.

7.  Zip Cloth Bag closed.

You should check your vacuum cleaner’s Drive Belt and
Rotating Floor Brush regularly for wear or damage. You 
should also clean the brush and brush ends of string, hair, 
and carpet fibers. These can wrap around the brush and 
hamper its ability to effectively clean your carpet.

1. Unplug unit from electrical outlet.
2. Place Handle in Low Cleaning position and turn vacuum

cleaner face down on floor.

3. Locate two Lock Tabs adjacent to forward wheels on 

removable Brush Cover.

4. Using your fingers, press outward on Lock Tabs to remove

Brush Cover.

5. Grasp Rotating Floor Brush at both ends and lift up.
6. Clean strings, hair and other debris from Rotating Floor

Brush, paying particular attention to brush ends.

7. Clean strings, hair and other debris from Motor Pulley and

Drive Belt areas.

8. Check Drive Belt carefully for wear, cuts or stressed areas.

Inspect entire belt by rolling floor brush with the palm of
your hand several times in the direction of the Motor Pulley.

9. Check Air Passageway for obstructions. Remove debris from

this area.

WARNING:

To

reduce the risk of injury
from moving parts, turn
off vacuum cleaner and
disconnect Power Plug
from electrical outlet.

Tip:

This is a good
time to clean 
the Slide Track
area of hair,
string, dirt, 
or other
obstructions.

Check Rotating Brush and Drive Belt 

Replacement Bags

Use only BISSELL

®

Style 2 Dust Bags in your

Upright Vacuum Cleaner. You may purchase these
bags from your retailer, or to place an order
using Visa or MasterCard, cheque or money order
call:

BISSELL Customer Service

1-800-263-2535

Monday - Friday
8:00 A.M. - 4:30 P.M. (E.S.T.)
E-mail us at: [email protected]
Or visit our Web Site @ 

www.bissell.com

Lock Tabs

Summary of Contents for 3512-5 Series











Reviews: