Bissell 28F4 SERIES User Manual Download Page 3

T

hanks for buying a BISSELL Powerforce™ Pet Cyclonic Vacuum

 

w w w. b i s s e l l . c o m  

I

MPORTANT SAFETY INSTRUCTIONS

 3

When using an electrical appliance, 

basic precautions should be observed, 

including the following: 

READ ALL  

INSTRUCTIONS 

BEFORE USING YOUR  

UPRIGhT VACUUM. 

 

   WARNING:

 To 

reduce the risk of fire, 

electric shock, or injury:

 

 

Do not use outdoors or on wet surfaces.

 

Do not leave machine when it is plugged in.

 

Do not use with damaged cord or plug.

 

If appliance is not working as it should, has 

been dropped, damaged, left outdoors, or 

dropped into water, return it to a service agent.

 

Do not pull or carry by cord, use cord as a 

handle, close door on cord, pull cord around 

sharp corners or edges, run appliance over 

cord, or expose cord to heated surfaces.

 

Do not unplug by pulling on cord. unplug 

by grasping plug.

 

Do not handle plug or appliance with wet hands.

 

Do not expose hair, loose clothing, fingers 

or body parts to openings or moving parts.

 

Do not pick up hot or burning objects such 

as cigarettes, matches, or hot ashes.

 

Do not pick up flammable or combustible 

materials (lighter fluid, petrol, kerosene, etc.) or 

use in the presence of explosive liquids or vapour.

 

Do not use appliance in an enclosed space filled 

with vapours given off by oil base paint, paint 

thinner, some moth proofing substances,  

flammable dust, or other explosive or toxic 

vapours.

 

Not intended for use by persons (including 

children) with reduced physical, sensory or 

mental capabilities, or lack of experience 

and knowledge, unless they have been 

given supervision or instruction concerning 

use of the appliance by a person  

responsible for their safety

 

Young children should be supervised to ensure 

that they do not play with the appliance.

 

 

Remove plug from electrical outlet before 

cleaning or maintaining the appliance.

 

If the supply cord is damaged, it must be 

replaced by the manufacturer or its service 

agent in order to avoid a hazard.

 

Do not pick up toxic material (chlorine 

bleach, ammonia, drain cleaner, petrol, etc.).

 

Do not allow to be used as a toy.

 

Do not use for any purpose other than 

described in this user’s Guide.

 

use only manufacturer’s recommended 

attachments.

 

Do not use with any opening blocked; keep 

free of dust, lint, hair, and anything that 

may reduce air flow.

 

Keep appliance on a level surface.

 

Turn off all controls before unplugging.

 

Be extra careful when cleaning stairs.

 

This appliance is provided with double 

insulation. use only identical replacement 

parts.

 

Do not use without the dirt container and 

filters in place.

 

Pay close attention when working around 

children.

 

unplug before attaching TurboBrush™ tool. 

 

Do not pick up hard or sharp objects such as 

glass, nails, screws, coins, etc. 

SAVE THESE  

INSTRUCTIONS 

FOR FUTURE USE

This model is for household use only.

IMPORTANT 

FOR OPERATION ON A 220-240 VOLT 

A.C. 50/60 Hz POWER SUPPLY ONLY. 

If your appliance is fitted with a  

nonrewireable BS 1363 plug it must not be 

used unless a 13 amp (ASTA approved to BS 

1362) fuse is fitted in the carrier contained 

in the plug. (Spares may be obtained from 

your BISSELL supplier). If for any reason the 

plug is cut off, it must be disposed of, as it is 

an electric shock hazard should it be inserted 

into a mains socket. 

Summary of Contents for 28F4 SERIES

















Reviews: