7
www.BISSELL.com
3
1
2
3
4
Emptying the Dirt Tank
WARNING
»
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing
maintenance or troubleshooting.
»
Do not operate your Adapt™ Ion Pet with damp or wet filters or without filters in place.
1
2
Hold the
hand vacuum
vertically and
press release
button on the
front to release
the Dirt Tank.
Make sure the
vacuum is OFF.
Remove the
hand vacuum
by pressing the
release button on
its top handle.
Grasp filter tabs
and pull up to
remove filter
assembly and
empty dirt into
trash container.
Replace filter
assembly back into
the Dirt Tank and
attach Dirt Tank to
hand vacuum until
it snaps securely
into place.
Cleaning the Filters
NOTE:
You may rinse the filter and
screen in warm water to clean.
The filter and screen need to be
100% dry before reuse. The key to
maximum performance is having a
clean filter. Cleaning the filter after
each use will help your vacuum
operate at peak efficiency.
Turn power OFF and
remove the Dirt Tank as
directed in “Emptying the
Dirt Tank” section.
Tap firmly against
the inside of a trash
container, removing any
visible dirt.
4
Grasp filter tabs and lift up
to remove the Washable
Filter Assembly from
the Dirt Tank. Grip the
Filter Assembly and turn
counter-clockwise and lift
up to remove filter from
filter screen.
Replace filter back into
the filter screen then
turn clockwise to lock
into place. Attach filter
assembly back into the
Dirt Tank and attach
to hand vacuum until it
snaps securely in place.
