2
Figure 1
Figure 2
4.
Stretch out
TN10NP Tennis Net
(D) across the court.
5.
Hook the loop on the
TN10NP Tennis Net
(D) top cable around the net retaining pin on
Non
-
Winch Post
(B) and over the top pulley. See Figure 5.
6.
Cut off loop and remove
12”
of nylon cable coating from the top net cable, run cable over the top groove of the
net cable pully down the outside of the post. Insert cable into the winch cable hole on the
Winch Post
(A). Use the
Removable Winch Handle
(C) to crank cable until you achieve
38”
at the center of
TN10NP Tennis Net
(D).
See Figure 6.
