Bison ShootOut Combo SC2480IGAFB, Instruction Manual

Page: 4 / 7

1
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
—— Instruction Manual ——
I
N
G
ROUND
A
LUMINUM
S
OCCER
G
OALS
Customer Service
(800) 247-7668
1. Preassemble all 90
°
Corners (C) with Short Inner Tubes (D) using Connecting Bars (E) and 3/8” x 1” Hex
Bolts (J). Insert the Short Inner Tube (D) into the 90
°
Corner (C) leaving approximately 7” of the Short
Inner Tube (D) protruding. Slide Connecting Bar (E) into channel on Short Inner Tube (D) until two
threaded holes in the Connecting Bar (E) line up with 2 holes in the Short Inner Tube (D) and the 90 ° Cor-
ner (C). Install 3/8” x 1” Hex Bolts (J), 4 places per 90
°
Corner (C). See Figures 1, 2, and 3.
2. Position one
Crossbar (A), two Uprights (B), and two 90
°
Corner sub assemblies on the ground with the
net attachment tracks facing upward, in close proximity to the goal line at each end of the playing field.
Assemble the goal on the ground and raise as a unit into position.
3. Attach
Crossbar (A) to the 90 ° Corner (C) assemblies by sliding Crossbar (A) onto the protruding Short
Inner Tube (D). Install two 3/8” x 1” Hex Bolts (J) per end. See Figure 2 and 3.
4. Attach
both Uprights (B) to the 90
°
Corner (C) assemblies by sliding the Uprights (B) onto the protruding
Short Inner Tubes (D). Install two 3/8” x 1” Hex Bolts (J) per end. See Figure 2 and 3.
5. To install Optional European Backstays (H) insert the head of two 5/16” x 1” Carriage Bolts (K) into the
net attachment tracks at the bottom of each Upright (B) and slide upward to approximate position. Loosely
attach Backstay Mounting Bracket (I) using 5/16” Flat Washer (L), 5/16” Nylon Lock Nut (N).
See Figure 2.
NOTE:
If not using optional European Backstays SC02BSA proceed to instruction #7.
P A R T S L I S T
Item Qty Description Item Qty Description
A 2 Crossbar K 8 5/16” x 1” Carriage Bolt (Optional)
B 4 Upright L 8 5/16” Flat Washer (Optional)
C 4 90 ° Corner M 20 5/16” x 2 3/4” Hex Bolt
D 8 Short Inner Tube N 28 5/16” Nylon Lock Nut
E 12 Connecting Bar O 16 Net Ground Stake
F 4 Optional SC44S Ground Sleeves w/ Caps P 100 Net Attachment Clip
G 4 Long Inner Tube
H 4 Optional SC02BSA European Backstay
I 4 Optional Backstay Mounting Bracket
J 40 3/8” x 1” Hex Bolt
Date: 12/11/09 Rev: I.R. B.A. N.J.C. File: \publisher\instruction\SCIGA44 Ref#:860157
SC2480IGA, SC2170IGA, SC1865IGA, SC1265IGA, AND SC0945IGA