3
6.
Remove the plugs from the threaded holes in the
Ground
Anchor
(A). Unpack the
Pole
(B) and
Crank
(E). Align
the hinge tabs on the
Pole
(B) with the hinge tube on the
Ground Anchor
(A). Insert the
1/2”
X 6
1/2”
Hex Bolt
(I) through the hinge tabs. Install the
1/2”
-
13
Deformed
Lock Nut
(J) and tighten it before backing off 1/2 turn or
until
Pole
(B) can swivel on the
Ground Anchor
(A).
See Figure 4.
7.
Lift
Pole
(B) to approximately 45° and install the
3/4”
X
7”
Hex Bolt
(K) through the slot in the back of the
Pole
(B) bottom plate and then through the slot in the back of
the
Ground Anchor
(A) top plate. Hand tighten a
3/4”
Hex Nut
(L) onto the
3/4”
X
7”
Hex Bolt
(K). Make sure to tighten the
3/4”
Hex Nut
(L) onto the
3/4”
X
7”
Hex Bolt
(K) until you see threads on the other side of the nut. See Figures 5 & 6.
Figure 4
Figure 7
Figure 5
Important!
The
3/4”
X
7”
Hex Bolt
(K) and
3/4”
Hex Nut
(L) MUST remain in place until
Pole
(B) is raised and
bolted to the
Ground Anchor
(A) top plate.
8.
Lift the
Lower Arm
(C) over the top of the
Pole
(B). Align the holes in the
Lower Arm
(C) with the lower
holes in the
Pole
(B). Attach the
Lower Arm
(C) to the
Pole
(B) with a
5/8”
X
12”
Hex Bolt
(O) and a
5/8”
Lock Nut
(P). Tighten then back off 1/2 turn.
Lower Arm
(C) must pivot freely. See Figure 7.
Figure 6
