3
9.
Mount the
Backboard
(K) and
Goal
(L) to the
Extension Arm Assembly
(B) using the
Goal Mounting
Hardware
(M) provided with the
Goal
(L). See Figures 2,4, and 5.
10.
Tighten all hardware assuring that the goal and backboard are level.
11.
For Model BA833XL to adjust the level of the
Backboard
(K) loosen the hardware provided with the
Goal
(L). Tighten or loosed the factory installed setscrews on the bottom side of the
Extension Arm
Assembly
(B) while leaving the
Backboard Mounting H
-
Frame
(Q) hardware tight. Once level,
retighten the
Goal
(L) with the provided hardware. See Figure 2.
12. Install net provided with goal.
13. To adjust the height of the rim loosen the telescoping lock bolt, then loosen the lock handle while
gripping the adjustment handles. Adjust the pole upwards until the top of the goal measures
10’
from the
playing surface. Lock the pole at that height and apply the
10’
Height Indicator Label
(I) to the plated
inner tube. Line up the arrows on the
10’
label to the already attached
“
Rim Height Indicator
”
label.
Adjust the pole downward so that the goal measures
9’ 6”
from the playing surface. Lock the pole and
apply the appropriate height indicator label to the plated inner tube. Continue to lower the goal at
6”
increments, being careful to lock the pole each time, and apply the appropriate height labels until the
height of
8’
from playing surface is reached. See Figure 6
14. To roll the system, unscrew the
Lock Knob
(P) to release the lower front padding. This will lower the
unit to the portable position. To lock in place push padding to the original position and tighten the
Lock
Knob
(P) . See Figure 1
15. For storage or transport through a normal
78”
tall double doorway: remove the
Locking Pin
(O)
then pivot the extension arm, backboard and goal downwards. Store the
Locking Pin
(O) in the extension
arm.
See Figure 1.
Warning!
The recent popularity of adjustable height basketball systems has increased the risk of dental injury,
particularly to young players, due to players getting their teeth caught in the net.
G
E
F
E
C
B
G
H
F
D
Figure 3
GOAL HARDWARE (M)
(provided with goal)
GOAL (L)
BACKBOARD MOUNTING
BACKBOARD (K)
H - FRAME (Q)
EXTENSION ARM
ASSEMBLY (B)
Figure 2
